Volvo Remote Keys & Slot Keys

Shop replacement Volvo remote keys, slot keys, and remote flip keys at Noble Key Supply. This collection includes aftermarket, Paladin, Keyless2Go, refurbished OEM, and new OEM options for compatible Volvo vehicles.

Available keys feature five-button layouts with application-specific FCC IDs, frequencies, batteries, part numbers, and electronic configurations. Compare the replacement with the original key and verify current programming support before ordering.

Volvo Remote Keys

A Volvo remote key combines vehicle-access controls with the electronics required for its supported starting system. Depending on the model and year, the vehicle may use a dashboard slot key, traditional remote flip key, or another remote-key design.

Available remote functions may include:

• Lock

• Unlock

• Trunk release

• Approach or exterior lighting

• Panic alarm

A matching case and button layout do not guarantee compatibility. The replacement must use the correct FCC ID, frequency, electronic system, and manufacturer part number.

Volvo Slot Keys

A Volvo slot key is designed to fit into the vehicle’s dashboard key slot. This style differs from a conventional bladed ignition key and from newer proximity keys intended for passive entry.

Slot keys in this collection may include five buttons for lock, unlock, lighting, trunk, and panic functions. Available products include aftermarket, refurbished OEM, and new OEM configurations.

Before selecting a Volvo slot key, verify:

• Vehicle model and year

• FCC ID

• Frequency

• Manufacturer part number

• Battery type

• Button layout

• Key condition

• Programming requirements

Two Volvo slot keys can look nearly identical while using different FCC IDs or frequencies.

Volvo Remote Flip Keys

The collection also includes a remote flip key for compatible Volvo vehicles. This design combines a foldable mechanical blade, remote buttons, and an immobilizer transponder in one housing.

The available flip-key configuration uses an ID48 chip and operates at 315 MHz for supported applications. A flip key cannot be substituted for a slot key simply because both have five buttons.

Confirm the ignition design and original key style before ordering.

Five-Button Volvo Remote Keys

The remote keys in this collection use five-button layouts. Typical functions include:

• Door lock

• Door unlock

• Trunk release

• Approach lighting

• Panic alarm

Button symbols and their positions should match the original key. A remote with the correct FCC ID but an incompatible button configuration may not provide all expected functions.

The vehicle must also be equipped to support each button. Installing a remote with an extra feature does not add that feature to the vehicle.

315 MHz Volvo Keys

Select Volvo remote and flip keys operate at 315 MHz. Products in this frequency range may use FCC IDs such as:

• LQNP2T-APU

• LTQV0315TX

These FCC IDs identify different remote-key designs and applications. Sharing a 315 MHz frequency does not make the keys interchangeable.

One configuration may be a flip key with an ID48 transponder, while another may be a Volvo slot-style remote. Match the complete specifications rather than frequency alone.

434 MHz Volvo Keys

Other Volvo slot keys in this collection operate at 434 MHz. Available FCC IDs include:

• KR55WK49264

• KR55WK49250

Both are five-button Volvo remote keys, but they may correspond with different part numbers, models, production years, or electronic systems.

A 434 MHz key will not replace a vehicle’s 315 MHz remote. Verify the frequency before programming.

Match the Volvo Key FCC ID

The FCC ID is one of the most important specifications when identifying a Volvo remote key. FCC IDs represented in this collection include:

• KR55WK49264

• KR55WK49250

• LQNP2T-APU

• LTQV0315TX

Compare the entire FCC ID with the original key or trusted vehicle application data. Small differences can indicate another circuit board, transmitter frequency, or vehicle generation.

If the original key is unavailable, use the vehicle identification number, model information, manufacturer documentation, and professional application data to identify the required key.

Verify the Volvo Part Number

Manufacturer part numbers provide another way to distinguish between similar remote keys. Part numbers represented within this collection include:

• 30659637

• 30772198

• 31252732

• 8688799

Use the part number together with the FCC ID, frequency, key style, and vehicle information. A part number alone may not account for every market or production variation.

Pay attention to superseded and replacement numbers. If a listing references more than one part number, confirm that the replacement is supported for the specific vehicle.

KR55WK49264 Volvo Slot Keys

Volvo slot keys with FCC ID KR55WK49264 operate at 434 MHz and use a CR2450 battery. This configuration is available in both aftermarket and Grade A refurbished OEM options.

An associated Volvo part number is 30659637. Compare this number with the original key and vehicle application before ordering.

Choosing between an aftermarket and refurbished OEM version allows the locksmith to offer an option based on customer preference and application availability.

KR55WK49250 Volvo Remote Keys

The collection includes a new OEM Volvo remote key with FCC ID KR55WK49250. This five-button key operates at 434 MHz and uses a CR2450 battery.

An associated manufacturer part number is 31252732. Because this key resembles other Volvo slot-key designs, verify the FCC ID and part number carefully.

Do not substitute a KR55WK49264 key for a KR55WK49250 application without confirmed compatibility.

LTQV0315TX Volvo Keys

Volvo remote keys with FCC ID LTQV0315TX operate at 315 MHz and use a CR2032 battery. An associated Volvo manufacturer part number is 30772198.

This configuration is available in premium aftermarket and new OEM options. Both versions still require vehicle-specific compatibility verification and programming.

The key’s five-button layout may control lock, unlock, trunk, approach lighting, and panic functions on supported vehicles.

LQNP2T-APU Volvo Flip Keys

The LQNP2T-APU configuration is a five-button remote flip key rather than a Volvo dashboard slot key. It includes:

• ID48 transponder

• 315 MHz remote

• Foldable mechanical blade

• Remote button functions

• Replaceable battery

An associated part number is 8688799. Confirm the blade profile, chip, and ignition type before selecting this replacement.

Volvo ID48 Transponder Keys

The remote flip-key option in this collection includes an ID48 transponder for compatible Volvo immobilizer systems. The transponder must be correctly prepared and learned to the vehicle before it can authorize starting.

ID48 is a chip-family designation and does not establish compatibility by itself. Programming requirements can vary according to the vehicle’s model, year, immobilizer generation, and available working keys.

Verify programmer coverage before cutting the blade.

New OEM Volvo Remote Keys

New OEM remote keys use original Volvo equipment intended for their listed applications. They are suitable when a new factory key is preferred.

A new OEM key is not pre-authorized to every compatible vehicle. It still requires application verification and professional programming.

Before ordering, confirm:

• OEM part number

• FCC ID

• Frequency

• Button layout

• Battery

• Key style

• Programming requirements

New OEM condition should not be confused with a refurbished or previously programmed key.

Refurbished OEM Volvo Keys

Grade A refurbished OEM keys reuse genuine original-equipment electronics. They provide another option when factory components are preferred but a new OEM key is unavailable or unnecessary.

A refurbished Volvo key may have minor cosmetic evidence of previous use. Preparation requirements can depend on the vehicle and key system.

Confirm that the key is suitable for reuse and supported by the equipment intended for programming. Not every previously used remote can be transferred to another vehicle without appropriate preparation.

Aftermarket Volvo Remote Keys

Aftermarket Volvo remote keys provide cost-effective replacements for supported vehicles. This collection includes options from Paladin, Keyless2Go, and other aftermarket sources.

A compatible aftermarket key may include:

• Remote housing

• Circuit board

• Buttons

• Battery

• Transponder when required

• Mechanical blade on flip-key designs

Included components vary by product. Check the individual listing rather than assuming that every key contains a blade or the same transponder.

Paladin Volvo Remote Keys

Paladin remote keys are premium aftermarket replacements developed for professional automotive locksmith use. Available options include Volvo five-button slot-key configurations for supported vehicles.

Paladin products are quality tested for dependable construction and consistent operation. Compatibility still depends on matching the vehicle’s FCC ID, frequency, part number, and electronic system.

Keyless2Go Volvo Remote Keys

The collection also includes a Keyless2Go premium aftermarket Volvo remote key. This option uses FCC ID LTQV0315TX, operates at 315 MHz, and is intended as a replacement for supported 30772198 applications.

Confirm the vehicle application and programming procedure before ordering.

CR2032 and CR2450 Batteries

Volvo remote keys in this collection use different coin-cell batteries, including:

• CR2032

• CR2450

The battery type corresponds with the key’s housing and circuit-board design. Do not use battery type as the only compatibility identifier.

A weak battery can reduce remote range or cause intermittent button operation. Install the specified battery with the correct polarity and test the key after programming.

Slot Key Versus Proximity Key

A Volvo slot key is inserted into a dashboard slot. A proximity key is designed for passive entry and push-button starting while remaining in the driver’s pocket or bag.

Although the housings may share Volvo styling, the systems are different. A slot key generally cannot replace a proximity key.

Verify whether the vehicle uses:

• Dashboard key slot

• Traditional keyed ignition

• Flip-key ignition

• Push-button start

• Passive-entry system

The original ignition and entry design should guide product selection.

Cutting a Volvo Flip-Key Blade

The remote flip key requires mechanical cutting before it can operate the door and ignition locks. Use the correct key machine, jaw, and cutting data for the blade profile.

Before cutting, confirm:

1. The blade matches the original profile

2. The key is secured properly

3. The correct tip or shoulder reference is used

4. The cutting machine is calibrated

5. The source key is not excessively worn

6. The flip mechanism operates smoothly

Slot keys without exposed ignition blades may have different mechanical or emergency-key arrangements. Review the individual listing for included components.

Programming Volvo Remote Keys

Volvo remote-key programming can require application-specific diagnostic equipment, software, security access, and vehicle data. Support varies among aftermarket programming platforms.

Before starting, verify:

• Vehicle model and year

• Key FCC ID

• Remote frequency

• Key condition

• Required software

• Security-access requirements

• Programming-tool coverage

• Add-key or all-keys-lost support

• Battery voltage and vehicle power stability

A key should not be cut, opened, or programmed until compatibility has been confirmed.

Remote and Immobilizer Functions

The remote transmitter and immobilizer authorization perform different functions.

The remote operates convenience features such as lock, unlock, trunk, lights, and panic. The immobilizer system determines whether the key is authorized to start the vehicle.

Depending on the Volvo system, both functions may be configured within the same programming session or require separate steps. Test every feature after programming.

Add-Key and All-Keys-Lost Situations

Programming a Volvo key when a working key remains may differ from an all-keys-lost procedure. An all-keys-lost job can require additional access, software, security data, or supported equipment.

Before ordering, confirm that your programming solution covers the specific condition. Coverage for adding a key does not automatically confirm support for an all-keys-lost vehicle.

Inspect the Key Before Programming

Inspect each Volvo remote key before beginning:

• Verify the FCC ID

• Confirm the frequency

• Compare the part number

• Check the button layout

• Identify the key style

• Confirm the battery

• Inspect the housing

• Test the transponder when applicable

• Verify programming support

• Confirm whether a blade is included

This inspection reduces the risk of preparing or programming the wrong key.

How to Choose the Correct Volvo Remote Key

Before ordering, verify:

1. Vehicle year, model, and trim

2. Original slot, flip, or proximity key style

3. Complete FCC ID

4. Manufacturer part number

5. 315 MHz or 434 MHz frequency

6. Button layout

7. Transponder type when applicable

8. Battery type

9. Included mechanical or emergency blade

10. New OEM, refurbished OEM, or aftermarket condition

11. Programming-tool compatibility

12. Add-key or all-keys-lost situation

Matching these details helps prevent incorrect orders and failed programming attempts.

Shop Volvo Remote Keys at Noble Key Supply

Browse Volvo slot keys and remote flip keys at Noble Key Supply. Choose from Paladin and Keyless2Go aftermarket replacements, Grade A refurbished OEM keys, and new OEM options in 315 MHz and 434 MHz configurations.

Compare the FCC ID, part number, frequency, battery, key style, and programming requirements to select the correct Volvo remote key for the job.